|
Made in: Snom, This Expansion Module is designed for connection to the snom 320/360/370 VoIP phone. Please read and adhere to the instructions on setting up and cleaning the phone in the snom 320/360/370 user manual. They also apply to the Expansion Module.
Installation procedure
- Unplug the power connector from the snom phone.
- Place the telephone and the Expansion Module upside down on a soft surface so that you can read nameplates from the front (see figure). The Expansion Module must be placed to the left of the telephone. The fixing holes in the Expansion Module (1) must be positioned over the corresponding screw domes on the telephone.
- Secure the Expansion Module to the telephone with the studs supplied.
- Connect the connection cable (2) as shown in the figure above.
- Affix the additional keyboard at the positions marked (3) in the illustration. Plug the connecting cord into the left jack of the first additional keypad
- and into the right jack of the new module. If you add a third additional keypad, attach it to the second one in the same manner.
- Now turn the telephone and Expansion Module over.
- Plug in the power connector of your phone. Wait for the snom phone to boot completely. Just before boot-up is completed, all LEDs on the Expansion Module(s) will flash once. The Expansion Module(s) is/are now ready for operation.
- Currently, three additional Expansion Modules with 42 function keys each can be connected to the snom phone. Their power is supplied by the phone; an external power adapter is not necessary.
- When you press the question mark key "?" on the phone's keypad the display will show the Expansion Module's version (EK: 1.3, for example) following the software version of the phone itself.
Programming the Expansion Module
Configure the function keys on the Expansion Module using the built-in web interface of the phone. The default operation is Line. The LEDs associated with each key will reflect the status of that line, e.g. ringing, on-hold, connected call, etc.
Changing the label
The label panels for the function keys are included on a separate sheet enclosed with the operating instructions. Cut out the label you wish to use. To change the label panel, press the flexible cover together between your index finger and thumb and lift it out. The label panel can now be changed.
Warranty: 2-Years.
 |
